Complete Metal Stamping, Metal Fabrication, and Tool & Die Facility (Royal Development Metal Stamping) – Day 1
Straight-Side Presses - to 600 Ton, Gap Frame & OBI Presses - to 176 Ton, Coil Servo Feed Lines - to 48” x 20,000-Lb, Yoder M2 Tube Mill, Riveters, Steel Coil & Square Tube Stock Inventory, Support Equipment & More
High Point, NC
Lot #101
(no title)
National Rivet & Manufacturing 1200 Riveter, S/N 325, with Rotary Feeder, Touch-O-Matic Safety Device, 440 Volt
Lot #102
(no title)
National Rivet & Manufacturing 1200 Riveter, S/N 500, with IFS 10" Vibratory Feeder, Touch-O-Matic Safety Device, 440 Volt
Lot #103
(no title)
National Rivet & Manufacturing 1200 Riveter, S/N 393, with Rotary Feeder, Touch-O-Matic Safety Device, 440 Volt
Lot #104
(no title)
National Rivet & Manufacturing 1200 Riveter, S/N 541, with Rotary Feeder, Touch-O-Matic Safety Device, 440 Volt
Lot #105
(no title)
National Rivet & Manufacturing 1200 Riveter, S/N 357, with Rotary Feeder, Touch-O-Matic Safety Device, 440 Volt
Lot #106
(no title)
National Rivet & Manufacturing 1200 Riveter, S/N 408, with Rotary Feeder, Touch-O-Matic Safety Device, 440 Volt
Lot #107
(no title)
National Rivet & Manufacturing 1200 Riveter, S/N 247, with Rotary Feeder, Touch-O-Matic Safety Device, 440 Volt
Lot #108
(no title)
National Rivet & Manufacturing 1200 Riveter, S/N 499, with IFS 10" Vibratory Feeder, Touch-O-Matic Safety Device, 440 Volt
Lot #109
(no title)
Logic Control Systems 22' 3-Station Transfer System, with (3) 18" x 60" Conveyors and Magnetic Lifting Heads
Lot #110
(no title)
Logic Control Systems 25' 4-Station Transfer System, with (4) 18" x 60" Conveyors and Magnetic Lifting Heads
Lot #111
(no title)
Logic Control Systems 11' Single Station Transfer System, with (2) 18" x 60" Conveyors and (1) Magnetic Lifting Head
Lot #112
(no title)
Logic Control Systems 11' Single Station Transfer System, with (2) 18" x 60" Conveyors and (1) Magnetic Lifting Head
Lot #114
(no title)
Verson SE4-600-84-72T 600-Ton Straight Side Double Crank Press, S/N 23323, 84" x 72" Bed, 12" Bolster, w/ Wintriss Autoset 1504 Plus Load Analyzer, SSC-1500 Part Revolution Control, Operator Control Console, Pedestal Mounted Dual Palm Button Operation, No Windows, Flush Floor
Lot #115
(no title)
Coe 48" x .187" x 20,000-Lb Coil Servo Feed Line, Consisting of: Coe CPCC-20048 Coil Cradle, Coe MCRS Coil Staging & Loading Ramp, Coe CPPS-400-48 7-Roll Coil Straightener (S/N 32202-3), w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop…
Lot #116
(no title)
Danly H2-400-84-48 400-Ton Straight Side Double Crank Press, S/N 5095706, 8" Stroke, 27" Shut Height, 84" x 48" Bed, 20-60 SPM, w/ Wintriss Autoset 1504 Plus Load Analyzer, SSC-1500 Part Revolution Control, Operator Control Console, Pedestal Mounted Dual Palm Button…
Lot #117
(no title)
Coe 36" x .250" x 20,000-Lb Coil Servo Feed Line, Consisting of: Coe CPCC-20036 Coil Cradle, Coil Staging & Loading Ramp, Coe CPPS-400-36 7-Roll Coil Straightener w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Support Chute, Coe 36"…
Lot #118
(no title)
Danly H2-400-84-48 400-Ton Straight Side Double Crank Press, S/N NA, 8" Stroke, 27" Shut Height, 84" x 48" Bed, 20-60 SPM, w/ Wintriss Autoset 1504 Plus Load Analyzer, SSC-1500 Part Revolution Control, Operator Control Console, Pedestal Mounted Dual Palm Button…
Lot #119
(no title)
Coe 36" x .250" x 20,000-Lb Coil Servo Feed Line, Consisting of: Coe CPCC-20036 Coil Cradle, Coil Staging & Loading Ramp, Coe CPPS-400-48 7-Roll Coil Straightener, w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Support Chute, Coe 36"…
Lot #120
(no title)
Danly H2-400-84-48 400-Ton Straight Side Double Crank Press, S/N 55-095708, 8" Stroke, 27" Shut Height, 84" x 48" Bed, 20-60 SPM, 36" Windows, Flush Floor, Bolster Plate, T-Slotted Ram
Lot #121
(no title)
Coe 36" x .250" x 20,000-Lb Coil Servo Feed Line, Consisting of: Coe CPCC-20036 Coil Cradle, Coil Staging & Loading Ramp, Coe CPPS-400-36 7-Roll Coil Straightener, w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Support Chute, Coe 36"…
Lot #122
(no title)
Danly H2-400-84-48 400-Ton Straight Side Double Crank Press, S/N 55-095712, 8" Stroke, 27" Shut Height, 84" x 48" Bed, 20-60 SPM, w/ Wintriss Autoset 1504 Plus Load Analyzer, Link System 2500 Programmable Limit Switch Control, Operator Control Console, 36" Windows,…
Lot #123
(no title)
Coe 36" x .250" x 20,000-Lb Coil Servo Feed Line, Consisting of: Coe CPCC-20036 Coil Cradle, Coil Staging & Loading Ramp, Coe CPPS-400-36 7-Roll Coil Straightener, w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Support Chute, Coe 36"…
Lot #124
(no title)
Niagara BP2-400-60-48 400-Ton Straight Side Double Crank Press, (S/N 52097), w/ Presswatch PW "Plus" Production Monitor, Operator Control Console, 4" Windows, Flush Floor, T-Slotted Bolster Plate, T-Slotted Ram
Lot #125
(no title)
Coe 36" x .250" x 20,000-Lb Coil Servo Feed Line, Consisting of: Coe CPCC-20036 Coil Cradle (S/N 25072-2), Coe CPSR-20036 Coil Staging & Loading Ramp (S/N 25072-3), Coe CPPS-400-36 7-Roll Coil Straightener (S/N 25072-1), w/ (2) Sets of Power Driven…
Lot #126
(no title)
Niagara SC2-300-72-42P 300-Ton Straight Side Double Crank Press, S/N 50327, 8" Stroke, 27" Shut Height, 72" x 42" Bed, 30-60 SPM, 32" Windows, T-Slotted Bolster Plate, T-Slotted Ram, Press Mounted Operator Controls w/ Dual Palm Buttons
Lot #127
(no title)
Coe 30" x .250" x 15,000-Lb Coil Servo Feed Line, Consisting of: Coe CPTR-PO-15030 Traveling Coil Reel, w/ Coil Staging Table, Coe CPPS-PO-400-30 7-Roll Coil Straightener (S/N 9447-2), w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Support Chute,…
Lot #128
(no title)
Clearing S2-200-48-42 200-Ton Straight Side Double Crank Press, S/N 55-184633P, 4" Stroke, 26" Shut Height, 48" x 42" Bed, 60-SPM, 18" Windows, T-Slotted Ram, Bolster Plate, Helm LoadGard TLS-4500 Press Monitor, Dual Palm Button Operation
Lot #129
(no title)
Coe 24" x .250" x 15,000-Lb Coil Servo Feed Line, Consisting of: Coe CPRT-15024 Traveling Coil Reel, w/ Coil Staging Table, Coe CPPS-PO-400-24 7-Roll Coil Straightener (S/N 5164-1), w/ (2) Sets of Power Driven Pinch Rolls, Coe CPRF-430 30" Servo…
Lot #130
(no title)
Clearing S2-200-48-42 200-Ton Straight Side Double Crank Press, S/N 54-18174-P, 4" Stroke, 26" Shut Height, 48" x 42" Bed, 60-SPM, 18" Windows, T-Slotted Ram, Bolster Plate, Helm LoadGard TLS-4500 Press Monitor, Dual Palm Button Operation (Currently Not Operable, Flywheel Removed…
Lot #131
(no title)
Coe 24" x .250" x 15,000-Lb Coil Servo Feed Line, Consisting of: Coe CPRT-15024 Traveling Coil Reel (S/N 5153-2), w/ Coil Staging Table, Coe CPPS-400-24 7-Roll Coil Straightener (S/N 5163-1), w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop…
Lot #132
(no title)
Aida NC2-16(2)B 176-Ton Gap Frame Double Crank Press, S/N 10516-1001, 7.9" Stroke, 17.7" Shut Height Over Bolster, 80" x 30" Bed, 30-55 SPM, w/ Wintriss Autoset 1500 Load Analyzer, T-Slotted Ram & Bolster Plate, Pedestal Mounted Dual Palm Button Operation
Lot #133
(no title)
Coe 12" x .156" x 10,000-Lb Coil Servo Feed Line, Consisting of: Coe CPCC Coil Cradle, Coil Staging & Loading Ramp, Coe CPPS-350-12 7-Roll Coil Straightener (S/N 12610-2), 12" x .310", w/ (2) Sets of Power Driven Pinch Rolls, Overhead…
Lot #134
(no title)
Komatsu OBW 150-2 165-Ton Gap Frame Double Crank Press, S/N 10329 (New 1993), 7.87" Stroke, 18.11" Shut Height Over Bolster, 79" x 30" Bed, 35-65 SPM, T-Slotted Ram & Bolster Plate
Lot #135
(no title)
Coe 30" x .250" x 15,000-Lb Coil Servo Feed Line, Consisting of: Coe CPPT-15030 Traveling Coil Reel, w/ Coil Staging Table, Coe CPPS-PO-400-30 7-Roll Coil Straightener, w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Control Chute, Coe CPRF-430…
Lot #136
(no title)
Komatsu OBW 150-2 165-Ton Gap Frame Double Crank Press, S/N 10319 (New 1992), 7.87" Stroke, 18.11" Shut Height Over Bolster, 79" x 30" Bed, 35-65 SPM, Wintriss AutoSet 1500 Load Analyzer, T-Slotted Ram & Bolster Plate, Pedestal Mounted Dual Palm…
Lot #137
(no title)
Coe 24" x .250" x 15,000-Lb Coil Servo Feed Line, Consisting of: Coe Coil Cradle, Coil Staging & Loading Ramp, Coe CPPS-PO-400-24 7-Roll Coil Straightener, w/ (2) Sets of Power Driven Pinch Rolls, Coe CPRF-424 24" Servo Feed, w/ BG-2…
Lot #138
(no title)
Verson 150-GP2-96 150-Ton Gap Frame Double Crank Press, S/N 28218, 8" Stroke, 28" Shut Height Over Bed, 108" x 30" Bed, 20-60 SPM, w/ Wintriss Autoset 1500 Plus Load Analyzer, T-Slotted Ram & Bolster Plate, Pedestal Mounted Dual Palm Button…
Lot #140
(no title)
Littell #90 Traveling Coil Reel, S/N 88114-85, Coil Staging Car, and Littell 408H-5PD Coil Straightener, S/N 88113-85, .187" x 8"
Lot #141
(no title)
Clearing GM-150 OBI Press, S/N 54-5267, 12" Stroke, 26" Shut Height, 40-SPM, 30" x 50" Bed, Triad Brake Monitor, T-Slotted Ram & Bolster Plate, Dual Hand Touch Operation
Lot #142
(no title)
Bliss C-110 110-Ton Flywheel OBI Press, S/N H52278, 6" Stroke, 20" Shut Height, 42" x 27" Bed, T-Slotted Bolster Plate, Dual Hand Touch Operation
Lot #144
(no title)
Automatic Feed Co., 18" x .250" 10,000 LB., 500' PM, Combination Coil Cradle and Straightener, Model 1041860 S/N 3289, With Overhead Loop Support Shut
Lot #145
(no title)
Aida C1-11, 121-Ton Gap Frame Press, S/N 00211-2624, 7" Stroke, 13.7" Over Bolster Shut Height, 56" x 26" Bed, 50-SPM
Lot #146
(no title)
Komatsu OBS 110-3 121-Ton Gap Frame Press with Feeder, S/N D-0008 (New 1992), 5.81" Stroke, 21" Shut Height, 43" x 27" Bed, 35-65 SPM, Coe 12" x .156" Servo Feed, w/ BG-2 Control and Wintriss DiPro 1500 Die Protection
Lot #147
(no title)
Coe 12" x .156" x 6,000-Lb Coil Servo Feed Line, Consisting of: Coe CPRT-6018 18"W Plain Uncoiler, w/ Coil Lift, Coe CPPS-350-12 7-Roll Coil Straightener, w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Control Shute
Lot #148
(no title)
Komatsu OBS 80-3 88-Ton Gap Frame Press, S/N D-0002 (New 1991), 5.12" Stroke, 13.78" Over Bolster Shut Height, 39" x 23" Bed, 37-75 SPM
Lot #150
(no title)
Coe CPPS-300-12 7-Roll Coil Straightener S/N 9832, w/ (2) Sets of Power Driven Pinch Rolls, Coiltek Loop Control
Lot #151
(no title)
Perfecto RD4-12B 6,000-Lb Cap. 12" x 60" Coil Cap., Double End Non-Motorized Uncoiler S/N RB-91036
Lot #152
(no title)
Minster 7 Dienamic 75-Ton OBI Press, S/N 70-16457, 4" Stroke, 21" Shut Height, 90-SPM, Coe 12" x .156" Servo Feed, w/ BG-2 Control & Magnetek GPD 503 Speed Control
Lot #153
(no title)
Minster 7 Dienamic 75-Ton OBI Press, S/N 70-17614, 4" Stroke, 21" Shut Height, 90-SPM, Coe 12" x .156" Servo Feed, w/ BG-2 Control, Wintriss DiPro 1500 Die Protection & CVR-P5U47P5 Speed Control
Lot #154
(no title)
Perfecto RD4-12B 6,000-Lb Cap. 12" x 60" Coil Cap., Double End Non-Motorized Uncoiler, R4-84059
Lot #156
(no title)
Coe CPPS-PO-300-12 7-Roll Coil Straightener, w/ (2) Sets of Power Driven Pinch Rolls, Coiltek Loop Control, S/N 9830-1
Lot #157
(no title)
Coe CPPS-PO-300-12 7-Roll Coil Straightener, w/ (2) Sets of Power Driven Pinch Rolls, Coiltek Loop Control, S/N 9831-1
Lot #159
(no title)
Cleveland 10-I 90-Ton OBI Press, S/N 10219-1, 8" Stroke, 21" Shut Height, 40-SPM, 28" x 40", w/ Triad Brake Monitor & Pax 5-6 Lube System
Lot #160
(no title)
Niagara A-5 OBI Press, S/N 27842, , 39" x 25" Bed, w/ Triad Brake Monitor (Broken Ram)
Lot #161
(no title)
Federal #8 100-Ton OBI Press, S/N 8-313, 7" Stroke, 19" Shut Height, 30-60 SPM, 28" x 36 Bed, w/ Triad Brake Monitor
Lot #163
(no title)
Coe 24" x .220" x 15,000-Lb Coil Servo Feed Line, Consisting of: Coe CPRT-15024 Plain Uncoiler, w/ Lift Table S/N 7124, Coe CPPS-PO-400-24 7-Roll Coil Straightener S/N 7424, w/ (2) Sets of Power Driven Pinch Rolls, Coe CPRF-430 30" x…
Lot #173
(no title)
Niagara ES75 OBI Press, S/N 47912, 8" Stroke, 21" Shut Height, 90 SPM, 36" x 24" Bed, Triad Brake Monitor, with Rotary Transfer System
Lot #174
(no title)
Niagara ES75 OBI Press, S/N 47901, 8" Stroke, 21" Shut Height, 90 SPM, 36" x 24" Bed, Triad Brake Monitor
Lot #175
(no title)
Niagara ES75 OBI Press, S/N 47909, 8" Stroke, 21" Shut Height, 90 SPM, 36" x 24" Bed, Triad Brake Monitor, AC 1020 Program Interface Module, Pax Lube System
Lot #176
(no title)
Niagara ES75 OBI Press, S/N 47906, 8" Stroke, 21" Shut Height, 90 SPM, 36" x 24" Bed, Triad Brake Monitor
Lot #177
(no title)
Niagara ES75 OBI Press, S/N 47913, 8" Stroke, 21" Shut Height, 90 SPM, 36" x 24" Bed, Triad Brake Monitor (Out of Service, Motor Out)
Lot #178
(no title)
Niagara E75 OBI Press, S/N 44061, 8" Stroke, 20" Shut Height, 40 SPM, 36" x 24" Bed
Lot #179
(no title)
Niagara E75 OBI Press, S/N 51499, 8" Stroke, 21" Shut Height, 90 SPM, 36" x 24" Bed, Triad Brake Monitor, AC M1020 Program Interface Module
Lot #180
(no title)
USI 60 Ton Torc-Pac OBI Press, S/N 57-8725, 4" Stroke, 13 1/4" Shut Height, 45 to 90 SPM, 22" x 32" Bed, AC M1020 Program Interface Module
Lot #181
(no title)
US Clearing Torc-Pac 60-Ton OBI Press, S/N 57-9148, 6" Stroke, 18" Shut Height, 90 SPM, 21" x 32" Bed, Triad Brake Monitor
Lot #182
(no title)
US Clearing Torc-Pac 60-Ton OBI Press, S/N 57-9154, 6" Stroke, 18" Shut Height, 90 SPM, 21" x 32" Bed, Triad Brake Monitor, AC M1020 Program Interface Module
Lot #183
(no title)
US Clearing Torc-Pac 60-Ton OBI Press, S/N 57-9064, 6" Stroke, 18" Shut Height, 90 SPM, 21" x 32" Bed, Die Cushion, Triad Brake Monitor
Lot #185
(no title)
South Bend 60FWAC 60 Ton OBI Press, S/N 72177, 4" Stroke, 12 1/2" Shut Height, 100 SPM, 32" x 21" Bed, AC M1020 Program Interface Module
Lot #186
(no title)
South Bend 60FWAC 60 Ton OBI Press, S/N 72176, 4" Stroke, 12 1/2" Shut Height, 100 SPM, 32" x 21" Bed, AC M1020 Program Interface Module
Lot #187
(no title)
Niagara M60 OBI Press, S/N 41033, 5" Stroke, 19" Shut Height, 90 SPM, 32" x 21" Bed, Triad Brake Monitor
Lot #189A
(no title)
Niagara M-45 45-ton OBI Press, S/N 44983, 4" Stroke, 11" Shut Height, 110 SPM, 28" x 18" Bed, Triad BM-1600 Digital Brake Monitor, AC M1020 Program Interface Module, to Include Hydraylic Parts Feed System, to Include Hydraylic Parts Feed System
Lot #189B
(no title)
Niagara M-45 45-ton OBI Press, S/N 44982, 4" Stroke, 11" Shut Height, 110 SPM, 28" x 18" Bed, Triad BM-1600 Digital Brake Monitor, AC M1020 Program Interface Module, Pax Lube System, to Include Hydraylic Parts Feed System
Lot #189
(no title)
Niagara M-45 45-Ton OBI Press, S/N 44984, 4" Stroke, 11" Shut Height, 110 SPM, 28" x 18" Bed, Triad Brake Monitor
Lot #190
(no title)
Clearing 45 Ton OBI Press, 30" x 18" Bed, Triad Brake Monitor, AC M1020 Program Interface Module
Lot #191
(no title)
Toledo 5A OBI Press, Mechanical Clutch, S/N 25955, 27" x 18" Bed, AC M1020 Program Interface Module
Lot #192
(no title)
Logic Control Systems, Parts Transfer System, (4) 8" Magnet Picking System with 24" x 48" Motorized Belt Conveyor
Lot #193
(no title)
Logic Control Systems, Parts Transfer System, (4) 8" Magnet Picking System with 24" x 48" Motorized Belt Conveyor
Lot #194
(no title)
Logic Control Systems, Parts Transfer System, 18" x 18" Magnet Picking System with 24" x 48" Motorized Belt Conveyor
Description
Straight-Side Presses
- 600-Ton Verson SE4-600-84-72T
- 400-Ton Danly H2-400-84-48 (4-Available)
- 400-Ton Niagara BP-400-60-48
- 300-Ton Niagara SC2-300-72-42
- 200-Ton Clearing S2-200-48-42 (2-Available)
Gap Frame Presses
- 176-Ton Aida NC2-16(2)B
- 165-Ton Komatsu OBW-150 (2-Available)
- 121-Ton Komatsu OBS 110-3
- 121-Ton Aida C1-110
- 88-Ton Komatsu OBS 80-3
- 75-Ton Niagara E-75 (5-Available)
- 66-Ton Aida
OBI Presses
- 110-Ton Bliss C-110
- 100-Ton Federal #8
- 75-Ton Minster 7 Dienamic
- 60-Ton Niagar M-60
- 60-Ton Clearing (5-Available)
- 60-Ton South Bend / Johnson
- 45-Ton Niagara M-45 (2-Available)
Servo Coil Feed Lines
- Coe 48” x .187” x 20,000-Lb
- Coe 36” x .250” x 20,000-Lb (4-Available)
- Coe 30” x .250” x 15,000-Lb
- Coe 24” x .250” x 15,000-Lb (3-Available)
- Coe 12” x .156” x 10,000-Lb (3-Available)
- Coe 12” x .156” x 6,000-Lb (3-Available)
Machine Shop
- Mitsubishi MV2400S CNC Wire EDM (New 2020)
- Mitsubishi FA20S CNC Wire EDM
- Acra 60A EDM
- Hardinge HLVH Toolroom Lathe
- Haas VF-3 CNC Vertical Machining Center
- Bridgeport 2-HP Vertical Milling Machines (3-Available)
- Chevalier FSG-1640AD 16" x 40" Automatic Hydraulic Surface Grinder (2-Available)
- Grand Rapids 12" x 40" Surface Grinder
- Acer AGS-1224AHD 12" x 24" Automatic Hydraulic Surface Grinder
- Acer AGS-1020AHD 10" x 20" Automatic Hydraulic Surface Grinder
- Acer 6” x 18” Surface Grinder
- MHT / Mitusi 6" x 12" Surface Grinder
- Carlton 3’ x 9” Radial Arm Drill
- K.H. Huppert Furnace
Metal Fabrication
- Yoder M2 Tube Mill
- Winton TR40 CNC Profile Bending Machine
- (150+) Riveters
- Haeger Hardware Insertion Presses (4-Available)
- Miller Welders
- Niagara 1B36-6-8 Press Brake
- Vertical & Horizontal Band Saws
- (3) H-Frame Shop Presses - to 150-Ton
- Blast-it-All "The Magnum" Abrasive Shot Blast
Plant & Production Support Equipment
- Vibratory Finishers
- (300+) Stackable Steel Bins
- 680-Position Heavy Duty Steel Bin Storage System
- Heavy Duty Die Storage Rack System
- Fully Automated Case Strapping System w/ (2) Signode 710 Strapping Units
- CAT, Clark, Hyster Forklift Trucks
Steel Coil & Square Tube Stock Inventory

In partnership with:

NC Auctioneer License: NCAL-9334 | NC Integra Auction Firm: NCFL-10443
Dates
Bidding Dates
14
Dec '22
10:00 AM
EST5EDT
14
Dec '22
10:00 AM
EST5EDT
Preview Dates
13
Dec '22
08:00 AM
EST5EDT
13
Dec '22
04:00 PM
EST5EDT
Pre-bidding Dates
Checkout Dates
16
Dec '22
08:00 AM
EST5EDT
3
Feb '23
04:00 PM
EST5EDT
Marketing
Directions
Location: 325 Kettering Rd., High Point, NC 27263
Preview
Tuesday, December 13, 2022, from 8:00 AM – 4:00 PM (ET), or earlier by appointment.
Contact: Tim Pfister | 708-765-4029 | tim@integra-as.com
Terms
- A buyer`s premium of 18% will be added to the hammer price of each lot sold.
- Payment is required 48 hours after receipt of the invoice. Acceptable forms of payment include wire transfer, cashier’s check, company check with bank letter of guarantee, or credit card (up to a maximum of $2000 - a convenience fee may be charged for credit card payments.) For timed online auctions, and hybrid online auctions payments will not be accepted on site.
- Invoices will include all applicable sales, export, use and other taxes due to any federal, state or local taxing authority, shall be in addition to the sale price and shall be paid to Integra at the time of sale of the Purchased Assets. Detailed tax and exemption information will be provided. To receive the benefit of any tax exemption, buyer must supply Integra Asset Solutions with a properly completed sales tax exemption certificate, for acceptance and approval prior to any invoice adjustment of said taxes.
- For any buyers residing outside the United States or Canada, a $2000 wire transfer deposit will be required for approval to participate in the auction. Deposit instructions will be emailed upon registration. Deposits must be received and confirmed prior to start of auction and can take up to 72 hours to process. Any deposits made will either be applied to the buyer’s invoice or refunded within 5 business days if a purchase is not made.
NO GUARANTEES OR WARRANTIES WHATSOEVER EITHER EXPRESSED OR IMPLIED.
PURCHASERS ARE STRONGLY ENCOURAGED TO INSPECT THE ITEMS BEFORE BIDDING.
FAILURE TO MAKE PAYMENT OR REMOVE ANY/ALL PURCHASED ASSETS WITHIN SPECIFIED TIMELINE, MAY RESULT IN CHARGED COSTS TO BUYER FOR ANY LOSSES INCURRED TO RESELL ASSETS, INTEREST, LEGAL FEES, MOVING, STORAGE, AND COMMISSIONS.
ALL SALES ARE FINAL - NO EXCEPTIONS
For complete removal and sale terms, reference the Complete Terms and Conditions.
Removal
- Removal days:
- Small Items: December 16, 2022 - January 6, 2023, Monday - Friday, 8:00 AM to 4:00 PM local time.
- Large Items/Items That Require Rigging: January 3, 2023 - February 3, 2023, Monday - Friday, 8:00 AM to 4:00 PM local time.
- Facility will be closed December 23, 2022 - January 2, 2023.
- Buyer shall be responsible for the safe and proper removal of any items purchased by the buyer. Integra does not pack, ship, store, crate, or rig items. Buyers may either pick up items at the designated auction site personally or can contract a third party to manage the removal process for them. Before items can be removed by a designated third party, buyer must provide Integra with (1) paid-in-full invoice and (2) "Buyer Release Form” which allows Integra to release items to a third party contractor for shipping, crating, rigging or packing purposes. Any person, buyer or rigger, performing removal will need to provide proper insurance.
- All hand-carry items must be removed within 48 hours of the conclusion of the sale. Integra shall have no responsibility whatsoever for any missing or lost items if items were not removed during the aforementioned timeframe. There will be NO removal of any items until the auction is complete.
- After the buyer has removed any item from Integra’s possession, Integra shall have no obligation to make any adjustment or accommodation to buyer because of any mistake in quantity or other defect or problem with respect to such item. Buyer must make all requests for adjustments in writing to Integra before any item is removed from the premises where the auction is conducted.
- Any items, including all associated parts, components, and accessories, if applicable, not removed on or before the published removal date, may at the option of Integra, be subject to a fee of $500 per day. Furthermore, any items not removed on or before the removal date shall be deemed abandoned and Integra shall have no further obligation to the buyer with respect to such items.
- Pre-qualified riggers will be posted here when they become available. Integra is not affiliated with any machinery rigging, transport, or export company. Rigging information is provided solely as a courtesy to our buyers. Integra does not endorse or guarantee the services of any machinery rigging, transport, or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of said companies.
Pre Approved Riggers:
Adair's Rigging and Transport
Joseph Adair (479) 414-2054
joe@adairsrigging.com
Gorham Industrial, LLC
James Gorham (803) 617-8434
jgorhamindustrial@hotmail.com
Guy M. Turner, Inc.
Jimmy Clark (336) 339-6563
jclark@guyturner.com