Auction Closed
Inventory Reduction Sale of a Major Plastics Equipment Dealer
Auction #285560
Description
Pumps & Gearboxes, Dryers & Blowers, Extruders, Lab Lines, Downstream, Blenders & Mixers, Granulators & Pulverizers, Molders & Thermoforming
Ended
Wed, Dec, 18th
04:00 PM
US/Eastern
Description
Pumps & Gearboxes
- 15 HP LCI ES 56/56 Gear Pump with Incomplete Beringer Screen Changer
- 40 HP Maag Extrex EX110-5BP Melt Pump
- Lufkin D440C Gearbox with 800 HP Service Rating
- 1,000 LB Stainless Steel Piovan Dryer Hopper
- 3,000 LB Stainless Steel Piovan Dryer Hopper
- 6,000 LB Stainless Steel Piovan Dryer Hopper
- 226 Cubic Foot Nooter Corp. Aluminum Drying Hopper
- 21 HP Piovan Pneumatic Material Blower
- Novatec CDM-750 Dessicant Dryer System
- 4" 9/1 Buss GS140 Kneader with 5.5" o.d. Hot Feed Extruder W/ Crammer Feeder, Gala #6 Pelletizer and Spin Dryer.
- 4" Farrel CP45 Continuous Mixer with Gala #5 Underwater Pelletizer
- 12" Dia. Readco Twin Screw Continuous Processor
- 100mm Davis Standard 100MM35F, 30/1 Non-Vented Extruder
- 4.5" HPM TMIII Single Screw Extruder, 30:1, 250HP DC Motor
- 8" Buss MDS200-4 Hot Melt Single Screw Extruder, 6:1 L/D, 100HP DC Motor
- 1.5" Killion KL-150 Single Screw Extruder, 24:1 L/D
- Farrel #9FCM Continuous Mixer, 500 HP DC Motor
- 100mm Leistritz ZSE100 GLAAX Co-Rotating Twin Screw Extruder, 44:1 L/D
- 30mm W&P ZSK30 Co-Rotating Twin Screw Extruder
- Unused 54" Black Clawson Extrusion Coating Line Station
- Randcastle Lab Sheet Extrusion Line. .75" Extruder, 8” Wide Sheet Die, Chill Roll Stack
- 2" Dia. Farrel CP2 Continuous Mixer with 3.5" Hot Feed Extruder
- Brabender PLX302 Plasticorder, 1.25" extruder with 25:1 L/D
- Arburg Allrounder 221-55-250 Lab Injection Molder
- 16" x 20" Hydrotrim Single Sheet Lab Thermoformer
- 5" Gneub KSF23A 130R Continuous Screen Changer
- 14' Long Conair ST107-16-2 Stainless Steel Cooling Tank, 12" x 12" cross section
- 12" wide x 12" deep x 48" long stainless steel water bath
- 10' Long Gatto Vacuum Sizing Tank, 16" x 18" cross section
- (2) 4.5" Wide x 22" Farris Solid Belt Pullers
- (2) 6" Cumberland Strand Pelletizers
- 92" Macro Model ME9-2 Slitter/Pull Roll Station
- 72" Dusenbery 815 Duplex score cut Slitter-Rewinder
- 2.25" CDS CSFK 2.50-L Dual Lane Fly Knife Cutter
- 72" Wide Allied "DuroFlow" AHM100 Flex Lip Sheet Die
- 92" Macro Model ME9-2 Slitter/Pull Roll Station
- 35 Cubic Foot Stainless Steel Double Cone Blender
- 30 Cubic Foot Stainless V-Blender, Includes intensifier bar
- 40 Cubic Foot Aaron Stainless Steel Jacketed Ribbon Blender
- Maguire WSB-100 3-Component Blender
- 20 Liter Stainless Steel Papenmeier TGHK20 Lab High Intensity Mixer
- 200 Liter Stainless Steel Henschel FM200 High Intensity Mixer
- 10 Liter Henschel FM10 High Intensity Mixer
- 50 Cubic Foot Scott MF484 Steel Blender/Feeder/Lump Breaker
- 4,200 Liter Stainless Steel Purnell HKM4200 Jacketed Mixer/Cooler
- 600 Liter Stainless Steel Henschel HKM600 Cooler
- 1,200 Liter Stainless Steel Littleford Cooler
- 600 Liter Stainless Steel Henschel Mixer
- 500 Liter Stainless Steel Henschel High-Intensity Mixer
- (3) 1,050 Liter Prodex/Henschel Coolers
- 20" x 50" Cumberland 5018H "Hog" Granulator
- 18" x 28" LR Systems SG500/BD-18 Granulator
- Wedco SE12-TC Dual Mill Pulverizer
- 16" x 16" LR Systems SG400 Granulator
- Uniloy 350R4 7-Head Blow Molder
- 4' x 8' PVI Single Station Thermoformer
- 30" x 30" Sencorp PI2500 Inline Thermoformer
- Hartig SMP-30 Dual Head Blow Molder
- 40" x 40" Lyle Thermoformer Model 140F
- Used 30 Ton Brown Inline Vertical Trim Press (2015)
- 84" Goulding Air Actuated Shear
- 110 Ton Schwabe Die Cut Press
- 67" Reifenhauser Back to Back Surface Winder
- 86" Reifenhauser Back to Back Surface Winders
- 19" Wide Godet Stand
- Weinig Unimat 5-Cutter Head Wood Working Molder
Add event to calendar
Dates
Bidding Dates
Wednesday
18
Dec '24
18
Dec '24
at
10:00 AM
US/Eastern
10:00 AM
US/Eastern
Preview Dates
Tuesday
17
Dec '24
17
Dec '24
at
08:00 AM
US/Eastern
08:00 AM
US/Eastern
Tuesday
17
Dec '24
17
Dec '24
at
04:00 PM
US/Eastern
04:00 PM
US/Eastern
Pre-bidding Dates
Checkout Dates
Thursday
19
Dec '24
19
Dec '24
at
08:00 AM
US/Eastern
08:00 AM
US/Eastern
Friday
17
Jan '25
17
Jan '25
at
04:00 PM
US/Eastern
04:00 PM
US/Eastern
Directions
Location: 25 Hainesport Mount Laurel Rd., Hainesport, NJ 08036
Preview
Tuesday, December 17, 2024, from 8:00 AM – 4:00 PM (ET), or earlier by appointment.
Contact: Bob Saunders | 708-765-4026 | bob@integra-as.com
Terms
- A buyer`s premium of 18% will be added to the hammer price of each lot sold.
- Payment is required 48 hours after receipt of the invoice. Acceptable forms of payment include wire transfer, cashier’s check, company check with bank letter of guarantee, or credit card (up to a maximum of $2000 - a convenience fee may be charged for credit card payments.) For timed online auctions, and hybrid online auctions payments will not be accepted on site.
- Invoices will include all applicable sales, export, use and other taxes due to any federal, state or local taxing authority, shall be in addition to the sale price and shall be paid to Integra at the time of sale of the Purchased Assets. Detailed tax and exemption information will be provided. To receive the benefit of any tax exemption, buyer must supply Integra Asset Solutions with a properly completed sales tax exemption certificate, for acceptance and approval prior to any invoice adjustment of said taxes.
- For any buyers residing outside the United States or Canada, a $2000 wire transfer deposit will be required for approval to participate in the auction. Deposit instructions will be emailed upon registration. Deposits must be received and confirmed prior to start of auction and can take up to 72 hours to process. Any deposits made will either be applied to the buyer’s invoice or refunded within 5 business days if a purchase is not made.
NO GUARANTEES OR WARRANTIES WHATSOEVER EITHER EXPRESSED OR IMPLIED.
PURCHASERS ARE STRONGLY ENCOURAGED TO INSPECT THE ITEMS BEFORE BIDDING.
FAILURE TO MAKE PAYMENT OR REMOVE ANY/ALL PURCHASED ASSETS WITHIN SPECIFIED TIMELINE, MAY RESULT IN CHARGED COSTS TO BUYER FOR ANY LOSSES INCURRED TO RESELL ASSETS, INTEREST, LEGAL FEES, MOVING, STORAGE, AND COMMISSIONS.
ALL SALES ARE FINAL - NO EXCEPTIONS
These are the abbreviated terms conditional for this specific auction event, please reference our Complete Terms & Conditions for all general terms and conditions as they relate to a transaction with Integra Asset Solutions.
Removal
- Removal days: December 19 - January 17, 2025, Monday - Friday, 8:00 AM to 4:00 PM local time.
- The facility will be closed from 12/24 through 1/1 and back on 1/2.
- Buyer shall be responsible for the safe and proper removal of any items purchased by the buyer. Integra does not pack, ship, store, crate, or rig items. Buyers may either pick up items at the designated auction site personally or can contract a third party to manage the removal process for them. Before items can be removed by a designated third party, buyer must provide Integra with (1) paid-in-full invoice and (2) "Buyer Release Form” which allows Integra to release items to a third party contractor for shipping, crating, rigging or packing purposes. Any person, buyer or rigger, performing removal will need to provide proper insurance.
- Integra shall have no responsibility whatsoever for any missing or lost items if items were not removed during the aforementioned timeframe. There will be NO removal of any items until the auction is complete.
- After the buyer has removed any item from Integra’s possession, Integra shall have no obligation to make any adjustment or accommodation to buyer because of any mistake in quantity or other defect or problem with respect to such item. Buyer must make all requests for adjustments in writing to Integra before any item is removed from the premises where the auction is conducted.
- Any items, including all associated parts, components, and accessories, if applicable, not removed on or before the published removal date, may at the option of Integra, be subject to a fee of $500 per day. Furthermore, any items not removed on or before the removal date shall be deemed abandoned and Integra shall have no further obligation to the buyer with respect to such items.
- Pre-qualified riggers will be posted here when they become available. Integra is not affiliated with any machinery rigging, transport, or export company. Rigging information is provided solely as a courtesy to our buyers. Integra does not endorse or guarantee the services of any machinery rigging, transport, or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of said companies.
Pre-Approved Rigger:
TBD
Integra is not affiliated with any machinery rigging, transport, or export company. Rigging information is provided solely as a courtesy to our buyers. Integra does not endorse or guarantee the services of any machinery rigging, transport, or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of said companies.