Surplus Machinery from Leading Rubber Products Manufacturer
Rubber Mill & Calenders, Testing Equipment, Chillers, Regenerative Thermal Oxidizer (RTO), Heated Platen Press
Goodlettsville, TN
Lot #1
Techpro rheoTECH MDPT Rheometer, S/N TPD-3096
Techpro rheoTECH MDPT Rheometer, S/N TPD-3096, with No Computer, "The rheoTech MDpt moving die processability tester is an instrument that makes viscoelastic measurements of polymers. Based on the principles of oscillatory shear and moving die rheometry, the instrument is said…
Lot #2
Alpha UTM G350D 500 lbf Tensile Tensometer Tester, S/N 718700
Alpha UTM G350D 500 lbf Tensile Tensometer Tester, S/N 718700, with 500 Lb. Load Cell Installed, Material Jaws, No Computer (LOCATED AT 85 EAST ROBINSON AVE, BARBERTON, OH 44203)
Lot #3
Heavy Duty 18″ x 48″ Two Roll Rubber Mill Body
Heavy Duty 18" x 48" Two Roll Rubber Mill Body, with (2) 18" x 48" Chilled Iron Cored Rolls with Rotary Unions, 11" Bearings, Pneumatic Split Flip Guides, Top Cap Style Frames 8.25" Wide, Drive Roll with Chain Sprocket Coupling Half,…
Lot #4
Farrel 22″ x 60″ 3-Roll Rubber Calender, S/N 3662
Farrel 22" x 60" 3-Roll Rubber Calender, S/N 3662, with (3) 22" x 60" Cored Chilled Iron Rolls with Rotary Unions, Adjustable Guides on Side Rails, Top & Bottom Roll Adjustment, Even Gearing Teeth, 22T x 22T x 22T, Frictioning…
Lot #5
Farrel 22″ x 60″ Unitized Two Roll Mill Heavy Duty
Farrel 22" x 60" Unitized Two Roll Mill Heavy Duty, with (2) 22" x 60" Cored Rolls with Rotary Unions, Pneumatic Split Tilt Stock Guides with Delron Edge Guides, Pressure Sensitive Front & Rear Belly Bars, Overhead Safety & Air…
Lot #6
Bolling 28″ x 72″ Inclined Heavy Duty Calender, S/N 13092
Bolling 28" x 72" Inclined Heavy Duty Calender, S/N 13092, with (2) 28" x 72" Drilled Steel Rolls with Roller Bearings, Modern Inclined Style Frames, Motorized Roll Adjustments, Hydraulic System, 230 hp Roller Bearing Direct Drive Gear Reducer, 250 hp…
Lot #7
TKS Industrial Regenerative Thermal Oxidizer (RTO) Pollution Control System
TKS Industrial Regenerative Thermal Oxidizer (RTO) Pollution Control System, With 75 hp Inverter Duty Blower Motor By Teco - Westinghouse Electric, 230/460 Volt, Schneider Electric Alitvar Digital 75 hp Motor Drive Panel, 15,000 cfm New York Blower Co. Booster Fan,…
Lot #8
Trane RTAC1554WQONUAFN 155-Ton Air Cooled Rotary Chiller, S/N U07K05963, 2007
Trane RTAC1554WQONUAFN 155-Ton Air Cooled Rotary Chiller, S/N U07K05963, 2007, with Air-Cooled Outdoor Unit, 460/3/60, Previous Usage: Automotive Materials Manufacturing Facility, Currently Installed (LOCATED AT 801 BILL JONES INDUSTRIAL SPRINGFIELD, TN 37172) - Basic Loading Cost: $500
Lot #9
Trane RTAC1554WQONUAFN 155-Ton Air Cooled Rotary Chiller, S/N U07K05964, 2007
Trane RTAC1554WQONUAFN 155-Ton Air Cooled Rotary Chiller, S/N U07K05964, 2007, with Air-Cooled Outdoor Unit, 460/3/60, Previous Usage: Automotive Materials Manufacturing Facility, Currently Installed (LOCATED AT 801 BILL JONES INDUSTRIAL SPRINGFIELD, TN 37172) - Basic Loading Cost: $500
Lot #10
PHI 30-Ton Hydraulic Press, S/N S300U1212S-2WCS-X-Y-257-R, 1987
PHI 30-Ton Hydraulic Press, S/N S300U1212S-2WCS-X-Y-257-R, 1987, with (2) 12" X 12" Electric Heat & Water Cooled Platens, Water Cooled Bolster, 5" Daylight, 5" Ram, Attached Control Panel, Eurotherm 808 Instruments, 1 hp Hydraulic System (LOCATED AT 5500 WALWORTH AVE,…
Lot #11
Thermal Product Solutions T20C-2.0 Test Chamber, S/N SB20833.9
Thermal Product Solutions T20C-2.0 Test Chamber, S/N SB20833.9, with 30" W x 40" D x 36" H ID, -73 Deg. C to 200 Deg. C Temperature Range, Watlow Series 942 Controller, 208/1/60 (LOCATED AT 7420 BETHEL RD, GOODLETSVILLE, TN 37072)
Description
Rubber Mill & Calenders
- Bolling 28" x 72" Inclined Heavy Duty Calender
- Farrel 22" x 60" 3-Roll Rubber Calender
- Farrel 22" x 60" Unitized, Heavy Duty 2-Roll Mill
- 18" x 48" Heavy Duty 2-Roll Rubber Mill Body
- Alpha UTM Tensile Tensometer Tester
- Techpro rheoTECH MDPT Rheometer
- TKS Industrial Regenerative Thermal Oxidizer (RTO) Pollution Control System
- (2) Trane RTAC1554WQONUAFN 155-Ton Air Cooled Rotary Chillers
- PHI 30-Ton Hydraulic Press
Auction Licensing:
Tim Pfister Auctioneer (TN) 6604
Add event to calendar
Dates
Bidding Dates
3
Apr '23
10:00 AM
US/Central
3
May '23
10:00 AM
US/Central
Preview Dates
2
May '23
08:00 AM
US/Central
3
May '23
04:00 PM
US/Central
Pre-bidding Dates
Checkout Dates
4
May '23
08:00 AM
US/Central
20
May '23
04:00 PM
US/Central
Directions
Location: 7420 Bethel Rd, Goodlettsville, TN 37072
Preview
Primary Storage: Goodlettsville, TN & Satellite Locations: Springfield, TN; Cleveland & Barberton, OH. Please see lot description for location of each lot.
Tuesday, May 2, 2022, from 8:00 AM – 4:00 PM (ET), or earlier by appointment.Contact: Oliver Esmile | 330-631-7823 or Tim Pfister | 708-765-4029 | tim@integra-as.com
Terms
- A buyer`s premium of 18% will be added to the hammer price of each lot sold.
- Payment is required 48 hours after receipt of the invoice. Acceptable forms of payment include wire transfer, cashier’s check, company check with bank letter of guarantee, or credit card (up to a maximum of $2000 - a convenience fee may be charged for credit card payments.) For timed online auctions, and hybrid online auctions payments will not be accepted on site.
- Invoices will include all applicable sales, export, use and other taxes due to any federal, state or local taxing authority, shall be in addition to the sale price and shall be paid to Integra at the time of sale of the Purchased Assets. Detailed tax and exemption information will be provided. To receive the benefit of any tax exemption, buyer must supply Integra Asset Solutions with a properly completed sales tax exemption certificate, for acceptance and approval prior to any invoice adjustment of said taxes.
- For any buyers residing outside the United States or Canada, a $2000 wire transfer deposit will be required for approval to participate in the auction. Deposit instructions will be emailed upon registration. Deposits must be received and confirmed prior to start of auction and can take up to 72 hours to process. Any deposits made will either be applied to the buyer’s invoice or refunded within 5 business days if a purchase is not made.
NO GUARANTEES OR WARRANTIES WHATSOEVER EITHER EXPRESSED OR IMPLIED.
PURCHASERS ARE STRONGLY ENCOURAGED TO INSPECT THE ITEMS BEFORE BIDDING.
FAILURE TO MAKE PAYMENT OR REMOVE ANY/ALL PURCHASED ASSETS WITHIN SPECIFIED TIMELINE, MAY RESULT IN CHARGED COSTS TO BUYER FOR ANY LOSSES INCURRED TO RESELL ASSETS, INTEREST, LEGAL FEES, MOVING, STORAGE, AND COMMISSIONS.
ALL SALES ARE FINAL - NO EXCEPTIONS
For complete removal and sale terms, reference the Complete Terms and Conditions.
Removal
- Removal days: May 4 - 20, 2023, Monday - Friday, 8:00 AM to 4:00 PM local time.
- Buyer shall be responsible for the safe and proper removal of any items purchased by the buyer. Integra does not pack, ship, store, crate, or rig items. Buyers may either pick up items at the designated auction site personally or can contract a third party to manage the removal process for them. Before items can be removed by a designated third party, buyer must provide Integra with (1) paid-in-full invoice and (2) "Buyer Release Form” which allows Integra to release items to a third party contractor for shipping, crating, rigging or packing purposes. Any person, buyer or rigger, performing removal will need to provide proper insurance.
- All hand-carry items must be removed within 48 hours of the conclusion of the sale. Integra shall have no responsibility whatsoever for any missing or lost items if items were not removed during the aforementioned timeframe. There will be NO removal of any items until the auction is complete.
- After the buyer has removed any item from Integra’s possession, Integra shall have no obligation to make any adjustment or accommodation to buyer because of any mistake in quantity or other defect or problem with respect to such item. Buyer must make all requests for adjustments in writing to Integra before any item is removed from the premises where the auction is conducted.
- Any items, including all associated parts, components, and accessories, if applicable, not removed on or before the published removal date, may at the option of Integra, be subject to a fee of $500 per day. Furthermore, any items not removed on or before the removal date shall be deemed abandoned and Integra shall have no further obligation to the buyer with respect to such items.
- Pre-qualified riggers will be posted here when they become available. Integra is not affiliated with any machinery rigging, transport, or export company. Rigging information is provided solely as a courtesy to our buyers. Integra does not endorse or guarantee the services of any machinery rigging, transport, or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of said companies.