Surplus Injection Molding Equipment From ConMet
Injection Molders, Robots, Blenders, Temperature Controllers, Chillers, Dryers & Cranes
Lot #1
Uline H-1366 5,500-Lb Pallet Jack
Uline H-1366 5,500 Lb. Pallet Jack, 36" x 20.5" Forks. Located: Bryson City, NC
Lot #2
Dayton 4YX97 5,500-Lb Pallet Jack
Dayton 4YX97 5,500 Lb. Pallet Jack, 48" x 27" Forks. Located: Bryson City, NC
Lot #5
Presto C62A-1000 Electric Stacker
Presto C62A-1000 Electric Stacker, S/N 1193099/V041994-100, 62" Lift, 25" Forks, May Need Batteries. Located: Bryson City, NC
Lot #7
ACS 16′ x 50″ Roller Conveyor w/ 60″ Rotating Section
ACS 16' x 50" Roller Conveyor w/ 60" Rotating Section. Located: Bryson City, NC
Lot #8
ACS 36″ x 120′ Powered Conveyor
ACS 36" x 120' Powered Conveyor, (2) Sections 36" x 30' Belt, (2) Sections 36" x 30' Powered Roller. Located: Bryson City, NC
Lot #9
Max-Pak MP-60-E Vertical Baler
Max-Pak MP-60-E Vertical Baler, S/N 04962905, 30" x 48" x 60" Bale Size, 460 Volt. Located: Bryson City, NC
Lot #10
Marathon V6030 Vertical Baler
Marathon V6030 Vertical Baler, S/N 60498, 30" x 48" x 60" Bale Size, 208 Volt. Located: Bryson City, NC
Lot #11
Jet VBS-2012 Vertical Bandsaw
Jet VBS-2012 Vertical Bandsaw, S/N 414482, 56" x 59" Table, Blade Welder, 220-460 Volt. Located: Bryson City, NC
Lot #12
Grob NS36 Vertical Bandsaw
Grob NS36 Vertical Bandsaw, S/N 1269, 28" x 24" Table, Blade Welder, 220 Volt. Located: Bryson City, NC
Lot #13
Carlton 1A 5′ x 11″ Radial Arm Drill
Carlton 1A 5' x 11" Radial Arm Drill, S/N 1A2978, Power Clamp, (12) Spindle Speeds 80 - 2000 RPM, 4 Morse Taper, 24" x 30" x 24" High Tilting Box Table. Located: Bryson City, NC
Lot #14
Dayton 6W281B 20″ Drill Press
Dayton 6W281B 20" Drill Press, 15" x 13" Table, 115 Volt. Located: Bryson City, NC
Lot #16
Sterling Sales & Service 25-Ton Capacity Powered Rail Transfer Cart
Sterling Sales & Service 25-Ton Capacity Powered Rail Transfer Cart, 48" x 72" Platform, Pendant Control. Located: Bryson City, NC
Lot #17
Sterling Sales & Service 25-Ton Capacity Powered Rail Transfer Cart
Sterling Sales & Service 25-Ton Capacity Powered Rail Transfer Cart, 48" x 72" Platform, Pendant Control, Controls Need Repaired. Located: Bryson City, NC
Lot #18
Demag 10-Ton x 50′ Span Double Girder Top Running Bridge Crane
Demag 10-Ton x 50' Span Double Girder Top Running Bridge Crane, S/N 96190, Remote Control. DOES NOT INCLUDE RUNWAY RAIL CONDUCTOR BAR OR SUPPORT POSTS. Located: Bryson City, NC
Lot #20
Demag 25-Ton x 50′ Span Double Girder Top Running Bridge Crane
Demag 25-Ton x 50' Span Double Girder Top Running Bridge Crane, S/N 95176, Remote Control. DOES NOT INCLUDE RUNWAY RAIL CONDUCTOR BAR OR SUPPORT POSTS. (Furthest from Dock Door)Located: Bryson City, NC
Lot #22A
Fanuc R-2000iB-165F CNC Robot (Location: Midland, MI)
Fanuc R-2000iB-165F CNC Robot, S/N F102980 (2010), R-30iA CNC Control, Remote Pendant Control (Uninstalled; Location - Midland, MI - ABBY)
Lot #22B
Fanuc R-2000iB-165F CNC Robot (Location: Midland, MI)
Fanuc R-2000iB-165F CNC Robot, S/N NA (2010), R-30iA CNC Control, Remote Pendant Control (Uninstalled; Location - Midland, MI Bruno)
Lot #22C
Fanuc R-2000iB-165F CNC Robot (Location: Midland, MI)
Fanuc R-2000iB-165F CNC Robot, S/N R09800185 (2009), R-30iA CNC Control, Remote Pendant Control (Uninstalled; Location - Midland, MI)
Lot #22D
Fanuc R-2000iB-165F CNC Robot (Location: Midland, MI)
Fanuc R-2000iB-165F CNC Robot, S/N R09800198 (2009), R-30iA CNC Control, Remote Pendant Control (Uninstalled; Location - Midland, MI)
Lot #22
RPT (Robotic Production Technology) Robotic Waterjet System
RPT (Robotic Production Technology) Robotic Waterjet System, Job2259, Including; (2) Fanuc M-16iB Robots w/ R-J3iB Controls, Flow 7X Waterknife Intensifier Pump, Work Enclosure, 2-Station Index Table. Located: Bryson City, NC
Lot #23
Toshiba ISGS 500 Plastic Injection Molding Machine
Toshiba ISGS 500 Plastic Injection Molding Machine, S/N 518612, Injectvisor V10 Control, 48.75" x 48.25" Platen, 34" x 34" Between Post, 23.6" x 23.6" Min. Mold Size, Mold Height 13.8" - 55.1", 460 Volt (Press 8). Located: Bryson City, NC
Lot #24
Ranger RTA-500S3 Robot
Ranger RTA-500S3 Robot, S/N R-13097, Mitsubishi GOT 1000 Pendant Control, Travels; X - 84", Y - 36", Z - 48", 230 Volt (Press 8) Located: Bryson City, NC
Lot #25
Maguire WSB-MB Gravimetric Blender
Maguire WSB-MB Gravimetric Blender, S/N 95663-03, 3-Component, ML Micro Loader, Novatec Loader/Receiver, 110 Volt (Press 8). Located: Bryson City, NC
Lot #26
Advantage Sentra SK-1035LEP-41D1 Temperature Controller
Advantage Sentra SK-1035LEP-41D1 Temperature Controller, S/N 138492 (2014), 460 Volt (Press 8). Located: Bryson City, NC
Lot #27
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 92298 (2005), 460 Volt (Press 8). Located: Bryson City, NC
Lot #28
Toshiba ISGT 720 Plastic Injection Molding Machine
Toshiba ISGT 720 Plastic Injection Molding Machine, S/N NA, Injectvisor V10 Control, 60.25" x 60.25" Platen, 43.25" x 43.25" Between Post, 29.8" x 29.8" Min. Mold Size, 460 Volt (Press 10). Located: Bryson City, NC
Lot #29
Maguire WSB-MB Gravimetric Blender
Maguire WSB-MB Gravimetric Blender, S/N B111394-33, 3-Component, ML Micro Loader, Novatec Loader/Receiver, 110 Volt (Press 10). Located: Bryson City, NC
Lot #30
Toshiba ISGS 500 Plastic Injection Molding Machine
Toshiba ISGS 500 Plastic Injection Molding Machine, S/N 388012, Injectvisor V21 Control, 48.75" x 48.25" Platen, 34" x 34" Between Post, 23.6" x 23.6" Min. Mold Size, Mold Height 13.8" - 55.1", 460 Volt (Press 16). Located: Bryson City, NC
Lot #31
Ranger RTA-500S3 Robot
Ranger RTA-500S3 Robot, S/N R-13098, Mitsubishi GOT 1000 Pendant Control, Travels; X - 84", Y - 36", Z - 48", 230 Volt (Press 16). Located: Bryson City, NC
Lot #32
Maguire WSB-MB Gravimetric Blender
Maguire WSB-MB Gravimetric Blender, S/N B126918-39, 3-Component, ML Micro Loader, Novatec Loader/Receiver, Mounted on Fabricated Steel Base, 110 Volt (Press 16). Located: Bryson City, NC
Lot #33
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 86966, 460 Volt (Press 16). Located: Bryson City, NC
Lot #34
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 95791, 460 Volt (Press 16). Located: Bryson City, NC
Lot #35
Toshiba ISG 250 Plastic Injection Molding Machine
Toshiba ISG 250 Plastic Injection Molding Machine, S/N 623503, Injectvisor V10 Control, 32.25" x 32.25" Platen, 22" x 22" Between Post, 460 Volt (Press 17). Located: Bryson City, NC
Lot #36
Novatec VL Vacuum Loader
Novatec VL Vacuum Loader, S/N 10290, Siemens PLC, 115 Volt (Press 17). Located: Bryson City, NC
Lot #37
Maguire WSB-MB Gravimetric Blender
Maguire WSB-MB Gravimetric Blender, S/N B135794-37, 3-Component, (2) ML Micro Loaders (Missing 1 Hopper), Novatec Loader/Receiver, Mounted on Fabricated Steel Base, 110 Volt (Press 17). Located: Bryson City, NC
Lot #38
Athena MFLD1N0P0 Portable Temperature Controller
Athena MFLD1N0P0 Portable Temperature Controller, S/N 0523000980. Located: Bryson City, NC
Lot #39
Cincinnati Milicron MH300-21 Plastic Injection Molding Machine (Out of Service-Parts Machine)
Cincinnati Milicron MH300-21 Plastic Injection Molding Machine S/N H03A0497003, 40" x 40" Platen, 27" x 27" Between Post, 460 Volt, Out of Service-Parts Machine Only (Press 18). Located: Bryson City, NC
Lot #40
Toshiba ISGS 500 Plastic Injection Molding Machine
Toshiba ISGS 500 Plastic Injection Molding Machine, S/N 518812, Injectvisor V10 Control, 48.75" x 48.25" Platen, 34" x 34" Between Post, 23.6" x 23.6" Min. Mold Size, Mold Height 13.8" - 55.1", 460 Volt (Press 19). Located: Bryson City, NC
Lot #41
Ranger RTA-500S3 Robot
Ranger RTA-500S3 Robot, S/N 11729, Pendant Control, Travels; X - 84", Y - 36", Z - 36", 230 Volt (Press 19). Located: Bryson City, NC
Lot #42
Maguire WSB-MB Gravimetric Blender
Maguire WSB-MB Gravimetric Blender, S/N 95674-07, 3-Component, ML Micro Loader, Novatec Loader/Receiver, 110 Volt (Press 19). Located: Bryson City, NC
Lot #43
Advantage Sentra SK-1080P-41D1 Temperature Controller
Advantage Sentra SK-1080P-41D1 Temperature Controller, S/N 121947 (2011), 460 Volt (Press 19). Located: Bryson City, NC
Lot #44
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 89232, 460 Volt (Press 19). Located: Bryson City, NC
Lot #45
Toshiba ISG 120 Plastic Injection Molding Machine (Out of Service)
Toshiba ISG 120 Plastic Injection Molding Machine, S/N 812101, Injectvisor V10 Control, 26" x 24.25" Platen, 18" x 16.25" Between Post, , 460 Volt, Out of Service (Press 22). Located: Bryson City, NC
Lot #46
Toshiba ISG 250 Plastic Injection Molding Machine
Toshiba ISG 250 Plastic Injection Molding Machine, S/N 515409, Injectvisor V10 Control, 32.25" x 32.25" Platen, 22" x 22" Between Post, 10.1" - 41.7" Mold Height, 460 Volt (Press 23). Located: Bryson City, NC
Lot #47
Maguire WSB-MB Gravimetric Blender
Maguire WSB-MB Gravimetric Blender, S/N B111396-33, 3-Component, ML Micro Loader, Novatec Loader/Receiver, 110 Volt (Press 23). Located: Bryson City, NC
Lot #48
Advantage Sentra SK-1035G Temperature Controller
Advantage Sentra SK-1035G Temperature Controller, S/N 14858 (2016), 460 Volt (Press 23). Located: Bryson City, NC
Lot #49
Advantage Sentra SK-1080LEP-41D1 Temperature Controller
Advantage Sentra SK-1080LEP-41D1 Temperature Controller, S/N 121945 (2011), 460 Volt (Press 23). Located: Bryson City, NC
Lot #50
Toshiba ISG 1450DW Plastic Injection Molding Machine
Toshiba ISG 1450DW Plastic Injection Molding Machine, S/N 200907, Injectvisor V21 Control, 78.25" x 78.25" Platen, 57" x 57" Between Post, Mold Height 27.6" x 47.3" Mold Height, 460 Volt (Press 33). Located: Bryson City, NC
Lot #51
Maguire WSB-140R Gravimetric Blender
Maguire WSB-140R Gravimetric Blender, S/N B111383-34, 2-Component, ML Micro Loader, Novatec Loader/Receiver, 110 Volt (Press 33). Located: Bryson City, NC
Lot #52
Advantage Sentra SK-1035G-41D1 Temperature Controller
Advantage Sentra SK-1035G Temperature Controller, S/N 16649 (2016), 460 Volt (Press 33). Located: Bryson City, NC
Lot #53
Advantage Sentra SK-1080LEP-41D1 Temperature Controller
Advantage Sentra SK-1080LEP-41D1 Temperature Controller, S/N 138799, 460 Volt (Press 33). Located: Bryson City, NC
Lot #54
Toshiba ISF 2750D Plastic Injection Molding Machine
Toshiba ISF 2750D Plastic Injection Molding Machine, S/N 417502, Injectvisor V21 Control, 97.25" x 88.5" Platen, 72.75" x 64" Between Post, Mold Height 35.4" x 68.9" Mold Height, 460 Volt (Press 35). Located: Bryson City, NC
Lot #55
Ranger RTF-1500S4 Robot
Ranger RTF-1500S4 Robot, S/N R-11854, Pendant Control, Travels; X - 186", Y - 48", Z - 48", 230 Volt (Press 35). Located: Bryson City, NC
Lot #56
Maguire WSB-140R Gravimetric Blender
Maguire WSB-140R Gravimetric Blender, S/N B113655-34, 3-Component, ML Micro Loader, Novatec Loader/Receiver, 110 Volt (Press 35). Located: Bryson City, NC
Lot #57
Advantage Sentra SK-1080LEP-41D1 Temperature Controller
Advantage Sentra SK-1080LEP-41D1 Temperature Controller, S/N 121031 (2011), 460 Volt (Press 35). Located: Bryson City, NC
Lot #58
Husky H1000 RS135/125 Plastic Injection Molding Machine (Location: Canton, NC)
Husky H1000 RS135/125 Plastic Injection Molding Machine, S/N 2294650, Polaris Touchscreen Control, Shot Size: 449.32-Oz, 81.5" x 72.4" Platen, 61.02" x 51.97" Between Post, Mold Height 18.7" x 46.26" Mold Height, 460 Volt (Location: Canton, NC) THIS LOT WILL HAVE…
Lot #59
Husky H1000 RS135/125 Plastic Injection Molding Machine (Location: Canton, NC)
Husky H1000 RS135/125 Plastic Injection Molding Machine, S/N 3122571, Polaris Touchscreen Control, Shot Size: 449.32-Oz, 81.5" x 72.4" Platen, 61.02" x 51.97" Between Post, Mold Height 18.7" x 46.26" Mold Height, 460 Volt (Location: Canton, NC) THIS LOT WILL HAVE…
Lot #60
Cincinnati Milacron MTS225 Plastic Injection Molding Machine (Out of Service & Disconnected)
Cincinnati Milacron MTS225 Plastic Injection Molding Machine, S/N TB701DB010041 (2014), 460 Volt Shot Size 65.18 (in³) Shot Size 36.1(oz) Screw Diameter 2.76(in), Screw Area 5.9829 (in2), Screw Diameter 70(mm), Length over Diameter 20.0, Cubic in/per second max 17.75, Max Plastic…
Lot #61
Maguire WSB-140R Gravimetric Blender
Maguire WSB-140R Gravimetric Blender, 3-Component, Novatec Loader/Receiver, 110 Volt. Located: Bryson City, NC
Lot #62
Maguire WSB-240R Gravimetric Blender
Maguire WSB-240R Gravimetric Blender, S/N 108740-27, 3-Component, ML Micro Loader, Novatec Loader/Receiver, Mounted on Fabricated Steel Base, 110 Volt. Located: Bryson City, NC
Lot #63
Advantage Sentra SK-1090LE-41D1 Temperature Controller
Advantage Sentra SK-1090LE-41D1 Temperature Controller, S/N 119796 (2011), 460 Volt. Located: Bryson City, NC
Lot #64
Advantage Sentra SK-10835G Temperature Controller
Advantage Sentra SK-1035G Temperature Controller, S/N 151627 (2016), 460 Volt. Located: Bryson City, NC
Lot #65
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 87596 (2004), 460 Volt. Located: Bryson City, NC
Lot #66
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 86963 (2004), 460 Volt. Located: Bryson City, NC
Lot #67
Advantage Sentra SK-1035G Temperature Controller
Advantage Sentra SK-1035G Temperature Controller, S/N 147713 (2016), 460 Volt. Located: Bryson City, NC
Lot #68
Advantage Sentra 2000HE SK-1080LEZ-41C1 Temperature Controller
Advantage Sentra 2000HE SK-1080LEZ-41C1 Temperature Controller, S/N 78873 (2002), 460 Volt. Located: Bryson City, NC
Lot #69
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 86084 (2004), 460 Volt. Located: Bryson City, NC
Lot #70
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 86961 (2004), 460 Volt. Located: Bryson City, NC
Lot #71
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller
Advantage Sentra SK-1035LEZ-41D1 Temperature Controller, S/N 87594 (2004), 460 Volt. Located: Bryson City, NC
Lot #72
Advantage Sentra S-960-41C1 Temperature Controller
Advantage Sentra S-960-41C1 Temperature Controller, S/N 28636, 460 Volt. Located: Bryson City, NC
Lot #73
Fasti/Farragtech 850L Fast Material Air Dryer
Farragtech 850L Fast Material Air Dryer, S/N 2-10070-4005, 1,700-Lb Capacity, 460 Volt. Located: Bryson City, NC
Lot #74
Fasti/Farragtech Material Air Dryer
Fasti Material Air Dryer, 500-Lb Capacity, 460 Volt. Located: Bryson City, NC
Lot #75
Conair D200 Material Air Dryer
Conair D200 Material Air Dryer, 980-Lb Capacity, 460 Volt. Located: Bryson City, NC
Lot #76
Conair Material Air Dryer
Conair Material Air Dryer, 400-Lb Capacity, 460 Volt. Located: Bryson City, NC
Lot #77
Novatec MPC-1000 Desiccant Dryer
Novatec MPC-1000 Desiccant Dryer, S/N 3A1886-0245, Siemens Touch Screen Control Interface, 4,000-Lb Capacity MPH-Hopper, 460 Volt (Dryer 1). Located: Bryson City, NC
Lot #78
Novatec MPC-1000 Desiccant Dryer
Novatec MPC-1000 Desiccant Dryer, S/N 12-1020-3352 (2003), Siemens Touch Screen Control Interface, 4,000-Lb Capacity MPH-Hopper, 460 Volt (Dryer 3). Located: Bryson City, NC
Lot #79
Novatec MPC-500 Desiccant Dryer
Novatec MPC-500 Desiccant Dryer, S/N 12-232-1679, Siemens Touch Screen Control Interface, 3,000-Lb Capacity MPH-Hopper, 460 Volt (Dryer 4). Located: Bryson City, NC
Lot #80
Novatec MPC-500 Desiccant Dryer
Novatec MPC-500 Desiccant Dryer, S/N 12-232-1678, Siemens Touch Screen Control Interface, 3,000-Lb Capacity MPH-Hopper, 460 Volt (Dryer 5). Located: Bryson City, NC
Lot #81
Novatec NDB-1500-C Desiccant Dryer
Novatec NDB-1500-C Desiccant Dryer, S/N 75329-2421 (2016), Siemens Touch Screen Control Interface, 460 Volt (Dryer 7). Located: Bryson City, NC
Lot #82
Novatec MPC-2000 Desiccant Dryer
Novatec MPC-2000 Desiccant Dryer, S/N 12-232-1680, Needs Controls, 6,000 Lb. Capacity MPH-Hopper, 460 Volt (Dryer 6). Located: Bryson City, NC
Lot #83
Novatec MPC-220 Desiccant Dryer
Novatec MPC-220 Desiccant Dryer, S/N 12-232-1677, Needs Control Interface, 1,000 Lb. Capacity MPH-Hopper, 460 Volt (Dryer 2). Located: Bryson City, NC
Lot #84
Novatec VPU-15 Vacuum Pump
Novatec VPU-15 Vacuum Pump, S/N 121020A-2223, CDC Dust Collector (Vac-Pump-04). Located: Bryson City, NC
Lot #85
Novatec VPU-15 Vacuum Pump
Novatec VPU-15 Vacuum Pump, S/N 121020A-2233, CDC Dust Collector (Vac-Pump-06). Located: Bryson City, NC
Lot #86
Novatec VPU-10 Vacuum Pump
Novatec VPU-10 Vacuum Pump, S/N 12-232-0860, CDC Dust Collector (Vac-Pump-03). Located: Bryson City, NC
Lot #87
Novatec VPU-10 Vacuum Pump
Novatec VPU-10 Vacuum Pump, S/N 12-232-0859 (Vac-Pump-02). Located: Bryson City, NC
Lot #88
Novatec VPU-10 Vacuum Pump
Novatec VPU-10 Vacuum Pump, S/N 12-232-0863 (Vac-Pump-01). Located: Bryson City, NC
Lot #89
Novatec VPU-15 Vacuum Pump
Novatec VPU-15 Vacuum Pump, S/N 8-9641-0609, CDC Dust Collector (Vac-Pump-05). Located: Bryson City, NC
Lot #90
Novatec VPU-10 Vacuum Pump
Novatec VPU-10 Vacuum Pump, S/N 12-232-0864, CDC Dust Collector (Vac-Pump-07). Located: Bryson City, NC
Lot #91
Novatec VPU-10 Vacuum Pump
Novatec VPU-10 Vacuum Pump, S/N n/a, CDC Dust Collector. Located: Bryson City, NC
Lot #92
Herbold SML 60/100-2 Granulator
Herbold SML 60/100-2 Granulator, S/N KA-016237 - 7951, 24" Dia. Rotor, 30" Wide Entry Conveyor, 460 Volt. Located: Bryson City, NC
Lot #93
Rapid W1836 50-HP Granulator (Disassembled)
Rapid W1836 50-HP Granulator, S/N 90726-10.1 (2006), Cyclone Dust Collector, 34" Wide Entry Conveyor, Machine Disassembled, 230/460 Volt. Located: Bryson City, NC
Lot #94
(2) Novatec 30 Cu. Ft. Surge Bins
(2) Novatec 30 Cu. Ft. Surge Bins, Mounted On Common Stand w/ (2) Novatec Loader/Receivers. Located: Bryson City, NC
Lot #97
Gaylord Loading Station
Gaylord Loading Station, Including: Pelletron Deduster, Rotary Valve, Cyclone, Scale NOT included. Located: Bryson City, NC
Lot #98
Flex-Kleen 100BVBS25III Dust Collector
Flex-Kleen 100BVBS25III Dust Collector, S/N E39226. Located: Bryson City, NC
Lot #99
Plastic Process Equipment BT1600 Gaylord Tipper
Plastic Process Equipment BT1600 Gaylord Tipper, S/N 36540418. Located: Bryson City, NC
Description


Injection Molding Machines
- (2) Husky H1000 RS135/125 (Location: Canton, NC)
- Cincinnati Milacron MTS-225 Magna Servo (New 2014)
- Toshiba ISF 2750D
- Toshiba ISG 1450DW
- Toshiba ISGT 720
- (2) Toshiba ISGS 500
- (2) Toshiba ISG 250
- Toshiba ISG 120
- Robotic Production Technology Robotic Waterjet Cutting System, w/ Flox 7X Intensifier, (2) Fanuc M-16-iB Robots
- (4) Fanuc R-2000iB-165F 6-Axis CNC Robots (Location: Midland, MI)
- Ranger RTF-1500S4 3-Axis Pick-and-Place Robot
- (3) Ranger RTA-500S3 3-Axis Pick-and-Place Robots
- (3) Peabody TecTank 7,010-Cu. Ft. Funnel Bottom Plastic Pellet Silos
- Peabody TecTank 3,710-Cu. Ft. Funnel Bottom Plastic Pellet Silo
- 30' High x 108" Diameter Funnel Bottom Plastic Pellet Silo
- 54' High x 102" Diameter Funnel Bottom Plastic Pellet Silo
- (2) Novatec 30-Cu. Ft. Surge Bins
- (2) 150 Cu. Ft. Surge Bins
- (8) Novatec VPU Vacuum Pumps – 10 & 15-HP
- Fasti/Farragtech 850L Fast Material Air Dryer
- (1) Novatec NDB-1500-C Desiccant Dryer (New 2016)
- (4) Novatec MPC-1000 & MPC-500 Desiccant Dryers
- (1) Novatec MPC-220 Desiccant Dryer
- Herbold SML 60/100-2 Granulator
- Rapid W1836 50-HP Granulator (Disassembled)
- (1) Maguire WSB-240R, 3-Component
- (3) Maguire WSB-140R, 3-Component
- (6) Maguire WSB-MB, 3-Component
- (21) Advantage Sentra Temp Controllers
- (7) Sterling Temp Controllers
- Advantage Water Cooling System with (2) Cooling Towers
- Demag 30-Ton x 50' Span Double Girder Top Running
- Demag 25-Ton x 50' Span Double Girder Top Running
- Demag 20-Ton x 44' Span Double Girder Top Running
- (2) Sterling Sales & Service 25-Ton Capacity Powered Rail Transfer Cart
- (3) Sullair 100-HP Rotary Screw Air Compressors
- (2) Sullair 200-HP Rotary Screw Air Compressors
- Sullair ES6XH/10/A Rotary Screw Air Compressor
- Sullair SRL-1000 Air Dryer
- RIX 4VX3B-5.5 Inert Dry Gas Compressor
- Parker MB-800 Nitrogen Generator
- Trane RAUJD104BA0320D0000 Air Cooled Chiller
- Paint System and (2) Paint Kitchen Enclosures
Auction Licensing:
Integra Auction Firm (NC) NCFL-10443; Tim Pfister Auctioneer (NC) NCAL-9334
In Conjunction With:

Add event to calendar
Dates
Bidding Dates
4
Aug '23
12:00 AM
US/Eastern
22
Aug '23
10:00 AM
US/Eastern
Preview Dates
17
Aug '23
08:00 AM
US/Eastern
17
Aug '23
04:00 PM
US/Eastern
Pre-bidding Dates
Checkout Dates
23
Aug '23
08:00 AM
US/Eastern
22
Sep '23
04:00 PM
US/Eastern
Directions
Primary Location: Bryson City, NC & Secondary Locations: Canton, NC & Midland, MI. Please see lot description for location of each lot.
Location 1: 1821 US-19, Bryson City, NC 28713
Location 2: 171 Great Oaks Dr, Canton, NC 28716
Location 3: 3304 South Saginaw Rd. Midland, Michigan 48642
Preview
Inspection: Thursday, August 17, 2023, from 8:00 AM – 4:00 PM (ET), or earlier by appointment. Contact: Bob Saunders | 708-765-4026 | bob@integra-as.com
Terms
- A buyer`s premium of 18% will be added to the hammer price of each lot sold.
- Payment is required 48 hours after receipt of the invoice. Acceptable forms of payment include wire transfer, cashier’s check, company check with bank letter of guarantee, or credit card (up to a maximum of $2000 - a convenience fee may be charged for credit card payments.) For timed online auctions, and hybrid online auctions payments will not be accepted on site.
- Invoices will include all applicable sales, export, use and other taxes due to any federal, state or local taxing authority, shall be in addition to the sale price and shall be paid to Integra at the time of sale of the Purchased Assets. Detailed tax and exemption information will be provided. To receive the benefit of any tax exemption, buyer must supply Integra Asset Solutions with a properly completed sales tax exemption certificate, for acceptance and approval prior to any invoice adjustment of said taxes.
- For any buyers residing outside the United States or Canada, a $2000 wire transfer deposit will be required for approval to participate in the auction. Deposit instructions will be emailed upon registration. Deposits must be received and confirmed prior to start of auction and can take up to 72 hours to process. Any deposits made will either be applied to the buyer’s invoice or refunded within 5 business days if a purchase is not made.
NO GUARANTEES OR WARRANTIES WHATSOEVER EITHER EXPRESSED OR IMPLIED.
PURCHASERS ARE STRONGLY ENCOURAGED TO INSPECT THE ITEMS BEFORE BIDDING.
FAILURE TO MAKE PAYMENT OR REMOVE ANY/ALL PURCHASED ASSETS WITHIN SPECIFIED TIMELINE, MAY RESULT IN CHARGED COSTS TO BUYER FOR ANY LOSSES INCURRED TO RESELL ASSETS, INTEREST, LEGAL FEES, MOVING, STORAGE, AND COMMISSIONS.
ALL SALES ARE FINAL - NO EXCEPTIONS
These are the abbreviated terms conditional for this specific auction event, please reference our Complete Terms & Conditions for all general terms and conditions as they relate to a transaction with Integra Asset Solutions.
Removal
- Due to operational restrictions onsite, removal of ALL items must be performed by Pedowitz Machinery Movers of The Carolinas. NO EXCEPTIONS. Contact Steve Colbert at Pedowitz (704) 773-1956 for assistance.
- Removal days: August 23 - September 22, 2023, Monday - Friday, 8:00 AM to 4:00 PM local time.
- Facility will be closed Monday, September 4th in observance of the holiday.
- Buyer shall be responsible for the safe and proper removal of any items purchased by the buyer. Integra does not pack, ship, store, crate, or rig items. Buyers may either pick up items at the designated auction site personally or can contract a third party to manage the removal process for them. Before items can be removed by a designated third party, buyer must provide Integra with (1) paid-in-full invoice and (2) "Buyer Release Form” which allows Integra to release items to a third party contractor for shipping, crating, rigging or packing purposes. Any person, buyer or rigger, performing removal will need to provide proper insurance.
- Integra shall have no responsibility whatsoever for any missing or lost items if items were not removed during the aforementioned timeframe. There will be NO removal of any items until the auction is complete.
- After the buyer has removed any item from Integra’s possession, Integra shall have no obligation to make any adjustment or accommodation to buyer because of any mistake in quantity or other defect or problem with respect to such item. Buyer must make all requests for adjustments in writing to Integra before any item is removed from the premises where the auction is conducted.
- Any items, including all associated parts, components, and accessories, if applicable, not removed on or before the published removal date, may at the option of Integra, be subject to a fee of $500 per day. Furthermore, any items not removed on or before the removal date shall be deemed abandoned and Integra shall have no further obligation to the buyer with respect to such items.
- Pre-qualified riggers will be posted here when they become available. Integra is not affiliated with any machinery rigging, transport, or export company. Rigging information is provided solely as a courtesy to our buyers. Integra does not endorse or guarantee the services of any machinery rigging, transport, or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of said companies.
Pre Approved Rigger:
Pedowitz Machinery Movers Of The Carolinas
Steve Colbert (704) 773-1956
Merlin Dow
Director of Sales – West
Gebrüder Weiss • Transport and Logistics
T (847) 795-4305
M (847) 767-3119
Merlin.dow@gw-world.com
www.gw-world.com